
电气配线图

Technical Specifications
| Electrical parameters | |
| Operating voltage | 20-30VDC |
| Operating current | <80mA |
| Short circuit protection (analog output) | have |
Reverse polarity protection (analog output) | have |
| 0-10V output | Minimum load 5000Oh |
| 0-20mA output | Maximum load 500Ω |
| 4-20mA output | Maximum load 500Ω |
| Switch output | PNP (NO/NC switchable) |
| Load current | Maximum 200mA (with short-circuit protection) |
| Switch point settings | Adjustable from 5% to 95% |
| Measurement accuracy | ±3% of the maximum measurement range |
| Repeatability | ±1% of the maximum measurement range |
| Protection level | IP67 |
| Temperature range | |
| Medium temperature range | -20°C to 75°C (Standard Type) -20°C to 200°C (High-temperature heat dissipation neck type)-70°C to 230°C (Amplifier split type) |
| Dielectric constant of dielectric | ≥1.8 |
| Maximum pressure of medium | 3MPa(Maximum withstand pressure) |
| Maximum measurement range of capacitance | 0~3.3nF |
| Electrical interface | |
| Electrical interface | 4-pin M12 connector(Analog output + 1 digital output)5-pin M12 connector(Analog output + 485 communication)8-pin M12 connector(Analog output + 3 digital outputs) |
① Liquid (or solid) medium; oily liquids with a dielectric constant higher than 1.8 can be measured, while the measurement accuracy of water-based liquids with a dielectric constant higher than 80 is related to the absolute length of the probe.
② Protection rating and connectors; all products have a protection rating of up to IP67. Standard products are equipped with M12 connectors.
③ Temperature and pressure; oneThe bulk liquid level sensor can operate normally in environments ranging from -20°C to +70°C. The split-type sensor with an external amplifier can withstand a maximum operating temperature of 230°C for its probe, while the maximum pressure in the container cannot exceed 10 bar.