
电气连接图

Technical parameter table
| Supply voltage | 20~30VDC |
| Power consumption | < 50mA |
| Analog output (short - circuit and reverse electrode protection) | 0~10V (minimum load 500R) 0~20mA (maximum load 500R) 4~20mA (maximum load 500R) |
| Switch output | PNP (NO, NC can be specified) |
| Load current | Maximum 200mA (with short - circuit protection) |
| Switch point position | Adjustable from 5% to 95% |
| Measurement accuracy | ±3% of the maximum measurement range |
| Repeatability accuracy | ±1% of the maximum measurement range |
| Thread | G1, G1-1/2, G1-1/4 |
| Shell material | Stainless steel 316L |
| Outer material of the probe rod | PTFE or PEEK |
| Probe rod length | 200mm~3000mm (PTFE)PEEK maximum 300mm |
| Capacitance measurement range | Maximum: 0~3.3nFMinimum: 0~3.3pF |
| Ambient temperature | 0~60℃ |
| Medium temperature | 0~70℃ (Split type: 0~230℃) |
| Storage temperature | -25~80℃ |
| Maximum medium pressure | 0.3MPa |
| Dielectric constant of the medium | > 1.8 |
| Electrical interface | M12 4 - pin connector |
| Protection level | IP67 |