Intelligent pressure/differential pressure/liquid level transmitter - Intelligent differential press

share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
Parameter
Product series
:
Pressure sensor
Material
:
Stainless steel 316L
Output
:
DC 4 - 20mA + HART protocol
Medium
:
Liquid or gas (compatible with contact materials)
Power supply
:
8 - 30VDC
Seismic performance
:
In any axial direction, the vibration influence at 200Hz is 0.2% URL/g
xr@xrinstrument.com
Obtain quotations
Size structureConnection lineDocumentDetail

Technical Specifications


Output signalDC4-20mA+HART Protocol
Output methodLinear outputSquare root output (can be remotely adjusted via configuration software)
Measurement range

Rated range 0-0.125~1.6KPa0-1.3~8KPa 0-6.2~40KPa          0-31.1~250KPa 0-0.117~1MPa 0-0.345~2.5MPa

Maximum static pressure at one end6Mpa8Mpa 10Mpa                         10Mpa                              10Mpa                        13Mpa

Zero point and rangeThe range and zero point can be adjusted using the onboard buttons or remotely using a HART handheld smart terminal.
Zero-point positive and negative migrationDuring a negative zero-point transition, the lower limit of the range must be greater than or equal to -URL; during a positive zero-point transition, the upper limit of the range must be less than or equal to +URL.The test range must be greater than or equal to the lower limit of the range.
Damping time constantThe time constant is adjustable, increasing in 0.1-second increments, from a minimum to 32 seconds. The default value is 0.1 seconds when the damping time is 0.
Ambient temperature limitStandard type: -40 to 85℃; LCD display: -20 to 70℃
Process temperature limit-40 to 104℃
Storage temperature limits-40 to 85℃
Ambient humidity0-95% relative humidity
Volume changeLess than 0.01in3 (0.16cm)3(Under zero-base calibration range reference conditions, silicone oil filling, 316L stainless steel diaphragm)
accuracyRange ratio <5:1:≤±0.1 % FSRange ratio ≥5:1:≤±0.25 % FS
stability% FSstability6
Ambient temperature influence-29 to 85℃ Zero-point error: 0.5%URL/56℃ Total error: (0.5%URL + 0.2% calibration range)/56℃
Vibration effectThe vibration effect at 200 Hz is 0.2% URL/g in any axial direction.
Power supply range8-30VDC
Intrinsically safe explosion-proofEx ia ⅡC T6 Ga Note: Intrinsically safe must be powered via a safety barrier or intrinsically safe power supply.
Installation location affectsZero drift is at most ±0.25 kPa. All zero drift can be corrected; it has no effect on the measurement range.
Load impactThere is no load effect unless the power supply voltage changes.
Load characteristicsCurrent-type load ≤ {(Us-12)÷0.02(Us=supply voltage)}Ω


Contact us

  • Company*

  • Address*

  • Name*

  • Email*

  • Social media*

  • Requirements*

Telephone:15624086688
Wechat
Scan